Case 11 Hardware Manufacture Factory 手工具廠

Click to see movie

Click to see movie


     For producing the hardware, the CNC machining centers are heavily used in factory. The running time is about 20 hours per day for every machine. There are so many chips and silt produced and exhausted into tank and mixed with coolant and oil. This tramp oil is difficult to carry out.

    Although the disk type of oil skimmer is adopted in most machines, they did not do the job well. They are rotating continuously but only few tramp oil is removed out. This means most of tramp oil stays in the tank and is pumped to cycle again and again. That is why the cutting surface of work-piece can not be so perfect as new coolant used. 

    Because the coolant is so dirty, the front porous plate opens a big hole for temperate flow. After a period of running, the coolant becomes clean and the work-piece has better quality than before. The small oil skimmer did a significant contribution. 

手工具廠的工件以CNC銑床加工, 產生大量的鐵屑及粉末, 在切削液中混合著油類, 被我司的多重過濾油水機漸次析出, 維持切削液的品質.

Posted in: